Skip to main content
  • SVF Cloud Administration Guide
  • Appendix
  • Printer properties

Printer properties

The items that can be set vary depending on the PDL.

On this page, "Default" means the setting value with each setting item disabled. (The default setting value is not displayed on the screen.)

Common to all PDLs

Setting item

Default

Description

Adjust horizontal print position (mm)

(Not specify)

The printing position can be adjusted in 0.1 mm increments in the horizontal direction.

Specify a positive value to adjust the position to the right and a negative value to adjust it to the left.

If not set, the position is not adjusted.

Adjust vertical print position (mm)

(Not specify)

The printing position can be adjusted in 0.1 mm increments in the vertical direction.

Specify a positive value to adjust the position to the downward and a negative value to adjust it to the upward.

If not set, the position is not adjusted.

Only some PDLs

SATO (SATOMR410, SATOLesprit)

Setting item

Default

Description

Narrow bar width for automatic calculation barcode

3

Set the narrow bar width in dots when barcode element sizes are automatically calculated for command output.

  • 1 to 12 (integer value)

Cut

0

Select when to cut labels.

  • 0

    None

  • 1

    Key break

    Labels are cut at a break page by a key break and at a break page that occurs when a form file has been output.

  • 2

    Always

  • 3

    Every job

Resolution

305

Set the printer resolution.

  • 305

    305 dpi

  • 203

    203 dpi

EPSON (ESCP)

Setting item

Default

Description

Printing of ruled lines

0

Set whether to print ruled lines of form layout.

  • 0

    Disable

  • 1

    Enable

Printing of static text

0

Set whether to print static texts of form layout.

  • 0

    Disable

  • 1

    Enable

FUJITSU (ESCP)

Setting item

Default

Description

Printing of ruled lines

0

Set whether to print ruled lines of form layout.

  • 0

    Disable

  • 1

    Enable

Printing of static text

0

Set whether to print static texts of form layout.

  • 0

    Disable

  • 1

    Enable

NEC (PR201)

Setting item

Default

Description

Printing of ruled lines

0

Set whether to print ruled lines of form layout.

  • 0

    Disable

  • 1

    Enable

Printing of static text

0

Set whether to print static texts of form layout.

  • 0

    Disable

  • 1

    Enable

IBM (IBM5577)

Setting item

Default

Description

Printing of ruled lines

0

Set whether to print ruled lines of form layout.

  • 0

    Disable

  • 1

    Enable

Printing of static text

0

Set whether to print static texts of form layout.

  • 0

    Disable

  • 1

    Enable

In this section: